SALIENT FEATURES & CONSTRUCTION OF BIOSAFETY CABINET

• Low Cost.
• Low Noise.
• User Friendly Ergonomic Design.
• Controlled Environment Particulate Free Product Protection.
• Work area surrounded by negative pressure, double wall plenums for protection.
• Aerodynamic designed airflow grille maintains safety by preventing blockage.
• Silent Vibration
• Free Blower ensure noiseless operation.
• Sound level no more than 65 dbA.
• The Unit is suitable for CLASS 100 conditions.
• 70% of the air is re-circulated through the HEPA filter.
• The contaminated air is drawn by the blower through the plenum of the cabinet.
• 30% of the air is exhausted from work area.
• Filtered Exhaust – protects ambient environment, and avoids build up, air borne particles.
• The exhaust of Safety Cabinet is connected to the Virus Burn out Unit for product and personnel protection.
• Air is drawn through Pre-Filter and is made to pass through high effective HEPA (High Efficiency Particular Air) filters.
• The efficiency of HEPA Filter is greater than 99.97% down to 0.3 micron.
• Basic material is thick board wood front back top and exterior surfaces are covered with Formica. OR Cold rolled steel duly powder coated OR Stainless Steel (SS-304) (as ordered).
• Working table is made of Stainless Steel Sheet (SS-304 grade).
• Window opens to 20cm±5mm working height with predefined locking device.
• Built in U.V. Germicidal light
• Facilitates sterilization of working area before and after use. Cock – for gas, air or vacuum, (only 1 no.) is provided.
• Working area is illuminated by fluorescent lighting fitted to the unit.
• The blower and motor assembly is statically and dynamically balanced of 1/5 H.P. capacity operates with minimum noise level.
• Height of the working table provides comfortable “SIT DOWN” working position for the operator.
• Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.